Getting Started

The Material Plane production hardware is one of the hardware options for Material Plane to track minis on a display.
It comes pre-assembled and can be bought from the Material Foundry webshop.

The table of contents on the left is ordered in a way that you should start from the top and move your way down, but below you will find a short description of the steps you will need to take to get started:

1. Make sure you know what the requirements are for using Material Plane
2. Figure out what hardware you need
3. Order the hardware
4. Wait way too long for the hardware to arrive :')
5. Update the sensor firmware
6. Figure out the optimal sensor mounting method and position
7. Connect the sensor to your WiFi network
8. Configure the sensor
9. Install and configure the VTT module
10. Calibrate the sensor
11. Learn how to properly use the module

Please check the troubleshooting page if you run into any issues.

If you encounter any bugs or wish to request new features, please contact me on Discord (@materialfoundry/@Cris) or post an issue on GitHub.
Consider joining the Material Foundry Discord Server.